Soda Water is a amazing, refreshing drink for health and fitness, because it is free of carbohydrates and sugars. Soda water is carbonated water, sometimes referred to as sparkling water , and is plain water with carbon dioxide gas added. It is the principal part of most “soft drinks”. Soda pop, loved my many, is basically carbonic acid — the product of carbonation. Soda water, or club soda, can be produced at home by using a seltzer bottle filled with water and then “charged” with carbon dioxide. Club soda is often just the same as plain carbonated water; however, in some instances, it can have a small amount of table salts, as well as sodium trace minerals. These additives make the slight taste of salt home made soda water . This process often produces carbonated mineral water and occurs naturally in many areas. Sparkling mineral water can sometimes cause a little dental decay. Potential dental problems with sparkling water are greater than normal water, but only slightly so. Sparkling water does not cause nearly as much tooth decay as regular soft drinks. The rate is so low it suggests that carbonation of drinks may, in fact, not be a factor in causing dental decay. Water that comes from the ground - usually from artesian wells - and filtered among layers of minerals containing some form of carbonates may absorb the carbon dioxide gas released by the carbonates. The outcome is usually called natural sparkling water. If the water also picks up enough different minerals to become flavored, it becomes sparkling mineral water. Basically, water + carbon dioxide = soda water. A naturally-occuring product of carbonation is sparkling mineral water. A device to produce an artificial carbonated mineral water was made in 1794 by a jeweler. Perrier, a sparkling natural mineral water, was judged to keep its fizz the longest in a taste test of several carbonated drinks;. For consumers who believe seltzer to be a bit harsh, club soda offers a more gentle fizz. In one part of the taste test, club soda seemed to be milder and a little sweeter tasting than standard carbonated water. If you are counting calories, be aware that club soda, sparkling mineral water, seltzer, and carbonated water have none; they are a great dieter’s choice over soda pop and tonic water. Tonic water is a type of carbonate drink containing water, sugar, carbon dioxide and quinine. Quinine was originately added to tonic water to help cure or prevent malaria. Today, to make a well-known alcoholic drink, it is often mixed with gin and lemon or lime. These are but a few of the interesting facts about soda water.

Original post: 
The Basics of Soda Water For Health And Fitness

Leave your Comment

It happens to every scrapbooker.  No matter how long you’ve been scrapbooking, you’re going to face scrapbooking burnout at some time.  There can be so many reasons for it.  Maybe you just can’t decide what papers to use or which embellishments.  Here are a few tips to help you overcome your scrapbooking burnout. 1. A new scrapbooking technique may be just what you need to spark your imagination. Grab some photos and try one out today. 2. Ignore the backlog of photos and just scrap one photograph.  Choose a favorite photo, and make it your focal point. Sometimes getting started is all the motivation you need.  3.  Give yourself permission to throw out poor quality photographs.   Your backlog will start to shrink and just looking through your photos may inspire you. 4. Your supply stash can bring inspiration.  Organize your supplies, and see if you are inspired to mix embellishments or papers in a new way. 5.  Your scrapbooking magazines are a great resource of inspiration.  Read one today for review of the latest products and ideas for page layouts.  6.  Take a scrapbooking course or workshop.  This is sure to bring your some motivation. 7.  Plan a scrapbooking crop for your friends.  If you don’t want to plan one yourself, attend a crop at your local scrapbooking store. 8.  A trip to your local scrapbooking store to see all the new products can also inspire you to start creating scrapbooking pages.   9. Stop trying to be perfect. Thinking every page you create must be a work of art only stops you before you ever get started.  Give yourself permission to make a less than perfect page layout.  10.  Scale down your scrapbooking supplies .  Give away or sell some of your stash and cure supply overload.  11.  Try it page by page.  Don’t set a goal of creating a scrapbooking album a night.   12.  Sign up for a scrapbooking challenge.  You can find these online in scrapbooking community message boards.  Joining the competition and excitement will start your scrapbooking creativity going again. 13.  Have you tried digital scrapbooking?  Digital scrapbooking is becoming more and more popular among scrapbookers.  It’s certainly less messy than traditional scrapbooking. 14.  Read online scrapbooking message boards and peek in their members’ galleries.  Just reading about the excitement of other scrapbookers may jump start your own creativity.   15. Show off your scrapbooks. When was the last time you pulled out your scrapbooks when family comes to visit or let your children read through your albums?  When you see all the pages you have designed, you just may be motivated to create some more.   Try just a few of these scrapbooking ideas , and chase away your scrapbooking burnout today.

Original post:
15 Tips to Chase Away Scrapbooking Burnout

Leave your Comment

Do you need to get other various dishes on your BBQ party? In fact, definitely it is unexciting if you only serve meat and meat every summer. Well, you are able to break the custom by not only giving pork on your BBQ party as you never know that some of your guests are vegetarian. You are able to still serve give the best dishing up  to your vegetarian guests by giving another side dishes beside common BBQ’. look at this! It is a good idea to give  your BBQ with some other kinds varieties. It means that you must add some side dishes instead of original BBQ’. It will not need a long time to get ready  and serve them in grilling. yet first of all you need to have aluminum foil, and of course spices, then you can begin cooking them. Wild Rice Pilaf You is able to definitely cook  something as stylish as a pilaf on your next BBQ. You is able to attempt to do some rules in preparing your BBQ: 1.    boil a cup of fresh mushrooms in medium-high temperature with a bit butter or olive oil for approximately five minutes. It should be done in a saucepan and you are able to do it the night before. 2.    pick a foil pot; at about 8×12 inches. Put your mushrooms, and add  two cups of steaming water in it. 3.    add in a quarter cup of dried up white wine. It’s important for you to apply white wine. 4.    Add  a half-cup of brown rice, and a half-cup of wild rice. You is able to also apply all brown rice or half brown and half white rice. 5.    Chop up half an onion, half a yellow pepper and two ripe tomatoes, and put them to your foil pot. 6.    Put a teaspoon of salt, a quarter teaspoon of pepper and approximately a half teaspoon of cumin. 7.    Mix them and wrap it with a piece of aluminum foil and seal it firmly. 8.    The next way involves your BBQ grill. place your covered foil pan in the center of the grill. After half and hour, open the pot and stir them. 9.    Refasten again and leave for about half hour. Your pilaf might be done well former if you have a very hot fire. So keep watching it. You will get tender rice in the best ending. Easy Dessert any other easy but delicious dessert that you can serve beside BBQ is grilled pineapple chunks. in fact, this one is a fiit dessert yet tastes fantastic and you require to do only a bit effort. This grilled pineapple chunks is able to be a amazing dessert once you chop up a pineapple into chunks or rings. in fact, chunks are better for grilling on your BBQ grill . after that, Put them until you notice light burn marks. Then, take it out off your grill and shake over with brown sugar. It’s luscious and bother free. the two side dishes on your BBQ party are very easy to be prepared on your summers. Not only delicious, but these side dishes are also simple to be prepared before your BBQ party starts. Dish them up them on your next BBQ party, and see that everybody is going to get a lot of joy because of this matter. Do you want to uplift your knowledge about BBQ ? There is no better way for getting it unless finding it more here!

Read the original post:
BBQ - Get Your BBQ More Luscious with Simple but Tasty Side Dishes!

Leave your Comment

A growing body of scientific evidence shows that chlorine in drinking water may actually pose greater long term health dangers than those for which it is used to eliminate. It is an undeniable fact that chlorine is an excellent germ killer. Its mandatory use in public swimming pools makes the water safe for all. But is it safe to drink? Seventy five per cent of the water we drink is provided through lakes, rivers, and reservoirs. Water from these sources is required to be treated with chlorine to kill bacteria. However, chlorination does not get rid of all parasites and can seriously harm people who use the water. Also, the cost of chlorination is unnecessarily high. There are more effective means of guaranteeing pure water that are not as expensive. Dr. N.W. Walker, D.S. states, “Chlorine is the greatest crippler and killer of the modern times. While it prevented epidemics of one disease, it was creating another. Two decades ago, after the start of chlorinating our drinking water in 1904, the present epidemic of the heart trouble, cancer and senility began.” Is there a correlation? Dr. J.M. Price MD states, “Cancer risks among people drinking chlorinated water is 93% higher than among those whose water does not contain chlorine.” If this is true, it is surely worthy of serious consideration. The chlorine can enter the system both through drinking and through the skin. Though outside the scope of this article, it is a fact that the hot chlorinated water of a shower can actually be an even greater danger than drinking the water! Scientific studies have linked chlorine and chlorination by-products to cancer of the digestive and excretory system in the bladder, liver, rectum, and colon. Dr. Riddle, Ph.D. stated, “Each day in America, about 30 cases of rectal cancer may be associated with THMs (chlorination by-products) in drinking water.” The circulatory system is also affected by chlorine, causing heart disease, atherosclerosis (hardening of the arteries), anemia, high blood pressure, and allergic reactions. There is also evidence showing that chlorine can destroy protein in our body and cause adverse effects on skin and hair. The presence of chlorine in the water may also contribute to the formation of chloramines in the water, which can cause taste and odor problems. Chlorine remains a required substance in public water systems. Therefore, it is up to the individual to remove it before the water is ingested. Besides the Berkey Shower Filter , some activated charcoal water filters, like the Crown Berkey , claim that they can remove all chlorine and chlorine compounds to “below detectable limits.” These pollutants include Chlorobenzene, Carbon Tetrachloride, Dichlorobenzene, Chloroform, and a number of others. The truth is, there is no need to wait until definitive research shows that chlorine causes long term problems. It is possible to remove it from the family water supply and increase the quality of our drinking water now.

See original here: 
Is Chlorinated Water Healthy to Drink?

Leave your Comment

The 10′ Rave Sports Bongo Water Bounce Platform is just made for fun in the sun for all the family. It comes with a slide and a Log and it will provide hours of fun for the kids, although it is designed to hold one adult and one child when bouncing and 3 adults sunbathing. Apart from bouncing on the platform you can go down the slide into the water and walk along the log trying not to fall into the water. The transportable  platform has 2 carrying handles and it is made from a PVC material that has UV inhibitors to reduce fading of the PVC. It is  a safe high-quality inflatable where the kids can bounce and the adults can lounge to work on their suntans, (safely and wisely of course). As with all fun in the sun remember to ‘ Slip - Slop - Slap’ with lots of sunscreen lotion. The Bongo bounce platform includes: a PVC repair kit hand pump carry bag anchor bag inflator adaptor. ( the inflator is not included) 3 step aluminum ladder

bounce-platform Rave Sports Bongo Bounce Platform - Summer Bounce Fun

Read the rest here: 
Rave Sports Bongo Bounce Platform - Summer Bounce Fun

Leave your Comment

Custom-labeled bottled water is available as an advertising or marketing device on many websites on the Internet; let’s see how it happened. Water originating in a subterranean spring and flowing to the surface is considered natural spring water. Natural spring water loses none of its minerals. Bottled spring water is better suited for your hydration needs, which is important for good health. Such water is free of the flavors, sugar, salt, impurities and toxins found in most water. The human body is over 70% water, affecting all of our physical functions. It regulates temperature, in addition to dissolving and ridding your body of various impurities and toxins. Nothing can clean and hydrate your body like pure, spring water. Important? It’s the most vital fluid you can drink. Myriad unhealthy conditions and illnesses have been linked to forms of mineral accumulation in the body. These range from arthritis to kidney failure. Research demonstrates that many of such problems are solved by removing these minerals and then flushing them out of the body. The result is the biggest new fad and growing industry– that of bottled water. Predictably, the first two pages of any Google search on bottled water lists multiple websites promoting water from pure springs all over the United States, each claiming to be the purest and best tasting. This then leads to the newest and most popular way to get your brand, logo and slogan out before the public. It’s bottled natural spring water that is imprinted with your company’s logo or trade mark on custom made labels. The term for this type of marketing is private labeling. This is a clever, affordable way to market your company name, logo, or message to your customers. Looking for something new and creative in the marketing industry? Custom labeled bottled waters or sparkling waters are a pouplar innovation, especially with the new health fad of always carrying drinking water with you. A form of branding becoming more and more widespread is private label bottled water for wedding guests. Custom labels can be made for weddings, cocktail parties, engagement parties and outdoor events, all with private labels with the name of the bride and groom, the wedding date, and so on.The label can be designed to match the napkins and other items one orders for weddings. To try your hand at making private labels instantly for free, go to freelabelmaker . I guess you could even use this device to announce the birth of your first son – private labeled bottled water named after the baby. I am certain if I sat here long enough, I can think of a million more or funnier ways to use private labeled bottled water, but I believe you get the idea from what I have already written.

Read the rest here:
Innovative Marketing: Bottled Water With Your Label

Leave your Comment

A conventional marine diesel engine produces its power by hot compressed air igniting fuel which has been sprayed under very high pressure into the cylinder head. A marine diesel engine does not have spark plugs to ignite the mixture or a carburetor to mix fuel and air. Instead it uses the pistons to compress the air to 3000 kPa which causes it to become very hot and the fuel is ignited as soon as it is injected into the cylinder. Some marine diesel engines are fitted with a heater plug in the inlet manifold or a glow plug in the pre-combustion chamber of each cylinder. These can provide additional heat to the combustion air during the starting process. Diesel engines are heavier and slower revving than gasoline engines but they are also more reliable because they do not rely on external carburetion or an electrical spark for ignition. Many newer engines employ an electronic fuel injection system where fuel and air are mixed more thoroughly in the pre-combustion chamber before entering the cylinder. This system maximizes power and fuel economy and is also less polluting. Any boater must have at least a basic understanding of how their engine works so we’ll begin by explaining the mechanical cycles. Most reciprocating piston internal combustion engines work on one of two mechanical cyclesóeither the four-stroke cycle or the two-stroke cycle. These cycles list, in the correct order, the mechanical actions by which the fuel and air gain access to the engine cylinder, the gas pressure – due to combustion – is converted into power and, lastly, the burnt gas is expelled from the engine cylinder. A Basic Four-Stroke Diesel Engine From its name, it is obvious there are four strokes in one complete engine cycle. A stroke is the movement of the piston through the full length of the cylinder and, since one such movement causes the crankshaft to rotate half a turn, it follows that there are two crankshaft revolutions in one complete engine cycle. In the order they occur the four strokes are: 1. Inlet stroke. With the inlet valve open and the exhaust valve closed, the piston moves from top dead center (TDC) to bottom dead center (BDC), which creates a low-pressure area in the cylinder. Clean, filtered air rushes through the opened inlet valve to relieve this low-pressure area, and the cylinder is filled with air. 2. Compression stroke. With both valves closed, the piston moves from BDC to TDC, compressing the air. During the course of this stroke the air becomes heated to a temperature high enough to ignite the fuel. 3. Power stroke. At approximately TDC, the fuel is sprayed or injected, into the hot compressed air, where it ignites, burns and expands. Both valves remain closed, and the pressure acts on the piston crown, forcing it down the cylinder from TDC to BDC. 4. Exhaust stroke. At approximately BDC the exhaust valve opens and the piston starts to move from BDC to TDC, driving the burnt gas out of the cylinder through the exhaust valve which is open. The Two-Stroke Diesel Engine The two-stroke engine uses two piston strokes to complete one power stroke and, therefore, it fires twice as often as a four-stroke engine. A two-stroke engine is smaller and simpler with fewer moving parts. A two-stroke engine has the potential to produce twice as much power as a four-stroke engine of the same size, however, because of the extra fitting required in a two-stroke diesel engine, for example blowers and governors, they become more expensive to produce. There has been a shift towards four stroke diesel engines which have become more efficient and smaller. Protect Your Marine Diesel Engine Protect your engine by avoiding long periods (more than 10 minutes) of idling in a ìno-loadî situation. This is often done to charge batteries or cool refrigeration but if done repeatedly it will glaze the bores of the engine and cause premature engine failure. If the boat is berthed the engine can be put in gear to create load at idle. All boat owners should have an understanding of basic marine diesel engine maintenance to keep themselves and their families safe on the water.

More here: 
How To Service A Marine Diesel Engine

Leave your Comment

Fly fishing is considered one of the oldest types of fishing ever to be used by man in order to feed his family. Initially it applied mainly to catch trout or salmon, but nowadays, it has turned into a basic way of catching marine fish as well as bass, carp, pike and lots of other types of fish species. The term comes from the word fly that refers to the fisherman’s lure consisting of a hook decorated to look like an insect for the purpose of getting fish to bite. Fly Fishing Equipment The gear needed in fly fishing are referred to as tackle, only that, when you want to be as specific as possible about the type of tools you need to add the word fly; so there you have fly tackle. The structure consists of the artificial flies, the fly line and the fly rod. For an improved cast, the line should be a little heavier than other types of lines. Moreover, the artificial flies come in all sorts of shapes, sizes and colors depending on the type of fish intended to be caught.  You can locate wholesale fly fishing tackle at many sporting goods stores on the internet. Generally speaking the artificial lure for fly fishing is made of hair, feathers, fur and other man-made materials that will render the desired aspect of the insect or creature supposedly used as bait for thetargeted fish. Each fishing location demands a certain type of artificial fly that will resemble insects sharing the same habitat with the fish you are after. Hence, the fly fishing methods used in one region may not work in another. Kinds of Fly Fishing Flies Another classification of flies is that which splits them into attractive and imitative. The imitative artificial lures are similar to real insects while the attractive ones simply resort to color or reflection of light in order to attract fish without necessarily looking like the food fish are after. And yet another classification splits the artificial lures into dry models (imitating grasshoppers, dragonflies, etc. which float on-water), sub-surface designs (looking like larvae, pupae) and wet kinds very much like leeches and minnows.   Whichever classification you use, learning the basic fly fishing knots will help you in securing your fly to the line. Differences Between Fly Fishing And Non-Fly Fishing Fishing Techniques The distinction between fly fishing and non-fly fishing is that the former is dependent upon the weight of the line which is cast in order to get the natural or artificial lure to that part of the water where your fish are located, probably at a farther distance from the shore or bank. The latter other fishing methods, rather uses the lure weight rather than the line; as this variable pulls the line down from the reel, the fly reaches the depths where fish hide or stay.  These differences will require the fly fisherman to master fly fishing casting techniques to ensure that the fly actually lands in the area of water that is where the fish are located.

Go here to see the original: 
Learn The Fly Fishing Basics And Hook The Big Fish

Leave your Comment